# Radar signal polarization and complex scattering Radar cross section

By: Haroon R
1. A radar system can be single channel with one transmitter and on the receiver.
2. A radar system may have one transmit channel and dual channel receiver.  This will determine cross pol leakage into orthogonal channel.
3. A Radar system with dual channel transmitter and a single channel receiver will receive the primary channel signal as well as the cross pol leakage from the orthogonal signal into the primary channel.
4. A system with dual channel transmitter and dual channel receiver will model two transmitted signals.  The dual channel receiver will receive the respective primary and orthogonal channel signals as well as the cross pol signals.
Target RCS can be modeled with varying degree of fidelity:
1. Constant target RCS.  This can help determine radar sensitivity threshold and usable range, etc.
2. Symmetric RCS.  The RCS is symmetric around an axis. For example, target is a cylinder.
3. Aspect dependent Real valued.  RCS matrix defies the complete aspect dependent variation of the RCS.
4. Aspect dependent Complex valued.  RCS matrix has complex-valued elements.
5. Complex scattering RCS.  Each element of the aspect dependent RCS matrix is a 2x2 complex scattering matrix. Scattering matrix defines the energy reflected by each polarized signal (primary & orthogonal) channel as well as the conversion of signal polarization from primary pol into orthogonal pol and vice versa due to the geometry and material characteristics.
The target RCS responds differently to each of the orthogonal polarized radar signal.  This helps to model advanced weather or SAR radars as well.
Figure above helps to illustrate the use of polarized channels, cross pol leakage into other channels and how a jammer might impact each of the channels independently. Considering complex scattering RCS for a spinning satellite, each of the polarized channels will experience different level of reflected signal from the target satellite.  These signals are processed independently to compute signal to noise ratio (S/N).  S/N is subsequently used to compute the derived data such as the probability of detection (Pd).  Target signature from each channel may be used to enhance the quality of results or for target identification. The above chart shows the primary channel S/N and the orthogonal channel S/N changing over time for a spinning satellite used as a target.
Posted: 7/28/2014 8:02:38 PM